Webos x86 download iso

Unless authorized in a separate agreement with The Qt Company, the source code may not be sublicensed. End-User Documentation. Sublicensee may be given the right to use the end-user Documentation, provided that such rights are limited to use in connection with the Sublicensed Software. Whenever the context reasonably permits, any reference in this Appendix to Sublicensed Software shall also apply to the end-user Documentation.

Limits on Use, Distribution and Derivative Works. Sublicensee must not be given the right to modify or create derivative works based on the Sublicensed Software, and it must be stated explicitly in the Sublicense that such modification or creation is prohibited.

Sublicensee may be given the right to make copies of the Sublicensed Software, provided that any such copy: a is created as an essential step in the utilization of Sublicensed Software in accordance with the Sublicense, or b is only for archival purposes to back-up the licensed use of Sublicensed Software. Sublicensee may also be given the right to make copies of Sublicensed Software to the extent reasonably needed to exercise rights under the Sublicense. Sublicensee must be obliged under the Sublicense to make sure that all The Qt Company trademark, copyright and intellectual property notices are faithfully reproduced and included on copies made by Sublicensee.

Sublicensee may be given the right to make copies of the Documentation, but only as reasonably needed to facilitate the use of Sublicensed Software. Sublicensee may not be given the right to make any other copies of Licensed Software or Documentation unless and except as permitted by The Qt Company in a separate, written agreement.

Other Versions and Updates. If Licensee is entitled to Updates in accordance with Section 12of the Agreement, such Updates may also be sublicensed, subject to the terms and conditions found in this Appendix. Protection of Sublicensed Software. Except as expressly permitted in this Appendix or in another written agreement with The Qt Company , Sublicensee must not be given any rights to modify or create derivative works based on Sublicensed Software, or reproduce Sublicensed Software, or distribute any copies of Sublicensed Software, or disclose any Sublicensed Software to any third party, or decompile, disassemble or otherwise reverse engineer Sublicensed Software, or use any Sublicensed Software or information learned therefrom.

Sublicensee must as part of the contractual terms in the Sublicense acknowledge that The Qt Company and its licensors own the copyrights and other intellectual property in and to the Sublicensed Software. Disclaimers Of Warranties. Responsibility of Sublicensee. Sublicensee shall, as part of the Sublicense, be made responsible for decisions made and actions taken based on Sublicensed Software.

Sublicensee shall as part of the contractual terms of the Sublicense be made aware that the Sublicensed Software is not designed, intended or licensed for use in or with systems, devices or products intended for surgical implant into the body or other applications intended to support or sustain life or for any aviation or nuclear reactor application or any other application in which the software or its failure, malfunction or inadequacy could directly or indirectly cause or contribute to personal injury or death or significant property damage.

It shall also be stated that the Sublicense defines a mutually agreed-upon allocation of risk and the Sublicense fees reflect such allocation of risk. Licensee shall, as part of the terms of the Sublicense, be entitled to terminate the Sublicense granted to Sublicensee if Sublicensee breaches terms and conditions set to comply with this Appendix. The Qt Company may instruct Licensee to terminate the Sublicense without undue delay if termination is warranted in accordance with the foregoing.

Upon termination of the Sublicense, Sublicensee shall be obliged to immediately cease all use of Sublicensed Software and to destroy all copies of Sublicensed Software within the possession or control of Sublicensee.

Mandatory law. The requirements above shall not apply to the extent they contravene mandatory provisions of the law governing the Sublicense, but in such case, The Qt Company shall be notified about the changes. No extra action required. Note: Do not remove any packaged file from the downloaded installer. System Permissions Administrator permission is required to run the installer. Perform the following: Screen 1: Accept the license agreement. Restart the system to ensure that the installation works properly.

The Update column allows you to update the component if an updated version is available. The Action column shows the operations install or uninstall that you can perform on the component. The latest version of the BIOS can be found here. To launch those images, you'll have to press F10 and directly select the boot device at boot time. A bit of BIOS configuration is required before installation. Redirected from Install tizen image.

Jump to: navigation , search. The installer contains two installation options: url ; with this option you only have to enter the complete url of the raw. Both options use the bmap-tools , the utility to download and flash your target device. Category : Common.

Navigation menu Personal tools Log in. These instructions will guide you on how to create a dual boot on your TouchPad with webOS 3. For everybody else I recommend the use of Tailor. Please note that Tailor 0. Now Select "Resize Partition" as activity this will only be available after a filesystem check and reduce the size by MiB.

This will take even longer. Now select "Unused space" in the list of partitions, select "luneos-root" in Tailor 0. If you happen to have Android installed on your TouchPad and can not select "Android system " in Tailor, please run the following command in a command line on your device see step 8 for command line instructions :.

Now select "USB media " form partition list again, select "Mount partition" as activity and press the button. The following steps are only required with Tailor 0. When the partition is created go into a command line on your device. The best way is probably to hook up the TP to your Computer and run novaterm.